|
|
Build Your Online Product Catalogs?
| Product Name: |
Aluminum foil anticorrosive adhesive tape
|
| Supply Ability: |
9999999 |
| Related proudcts |
|
| Specifications |
50-300mm |
| Price Term: |
FOB |
| Port of loading: |
QINGDAO |
| Minimum Order |
50 |
| Unit Price: |
3.0$/©O |
|
Aluminum foil anticorrosive adhesive tape
I. Process and Intended use:
Aluminum foil anti-corrosive adhesive tape is a new self-adhesive anticorrosion material with high anti-UV capability. For the base of this product, sheet of toughened aluminum foil is adopted, and for the adhesive layer is formed by a butyl rubber modified asphalt covered with a layer of anti-sticking separator.
This product is mainly used for anticorrosion of overhead pipes or tower structures for natural gas, petroleum, chemicals, pharmaceuticals, and heat, as well as urban supply of oil, gas, water, and heating. The product is made from substrate of aluminum foil, which has unique capability to reflect sunlight and anti-UV as well as flexibility and surface smoothness, and butyl rubber modified asphalt adhesive of high anticorrosive and adhesion. Therefore, the aluminum foil anticorrosion tape is Waterproof, anti-aging, non-curing, non-cracking, without moving and peeling for a long term, so that the anticorrosion capability is strong and the appearance is good. It has been proved that the product is excellent for anticorrosion.
II. Main Technical Parameters
III. Usage:
(1) Surface treatment: clear the rust, welding ***tter, burr, oil, dirt, and dry it. Class St3 should be reached for manual rust removal, while class St2 in SYJ4007-86 should be reached for mechanical rust removal.
(2) Apply the primer: an exclusive primer should be used, and the use should be away from fire source. Stir it until it is even, use clean brush, roller or other mechanical means to paint it evenly. Amount of primer to be used: for manual painting: 12£¯L, for mechanical painting: 20£¯L
(3) The winding may be performed 5-10 minutes after surface drying of primer.
(4) Temperature for use: ¡ª5℃Ò»+50~C.
IV. Transportation and storage:
(1) Avoid exposure to the sun and rain, and prevent freezing by heat preservation. Prevent crush and deformation. Do not be close to heat and open flame.
(2) Temperature for transportation and storage: |
| Company: |
Shandong Quanmin Plastic co.,Ltd
|
| Contact: |
Mr. Legend Liu |
| Address: |
North of Shengli Oil Extraction Plant Tuosi Joint Station, Dongying, Shandong, China |
| Postcode: |
257051 |
| Tel: |
00 86 13561030791 |
| Fax: |
86 0546 2079159 |
| E-mail: |
|
|
|
|
Home
